Tel:+8618805331919

JINQI Minerals

Products

Contact

JINQI Minerals
China (Mainland) Sales:
+8618805331919
Hong Kong sales:
+85231733712
Brazilian sales:
+5511989954731
Address:
No. 7, North Industrial Park, Baoshan Road, High-tech Zone, Zibo City, Shandong Province, China
For Cosmetics

For Cosmetics

Cosmetics Class talc powder is the top quality in talc products, at global level, there are only few mine resources fit to the requirement for cosmetics. The talc powder from JinQi is strictly follow NIOSH 9000:2015, ISO 22262-1:2012,without any asbestos content.
DescriptionChemical AnalysisProduct EffectSelection Guide
Cosmetics Class talc powder is the top quality in talc products, at global level, there are only few mine resources fit to the requirement for cosmetics. The talc powder from JinQi is strictly follow NIOSH 9000:2015, ISO 22262-1:2012,without any asbestos content.all the metals, bacteria are meet the standard requirement. Based on its function of lubrication, absorbent, anti-caking etc, it is a premium material for various cosmetics for Baby powder, face powder, puff cake, lipstick eye shadow, and so on.
Analysis
 
GB/T15342-2012 Standard Our Product
Whiteness 80 >95
Moisture 1.00 <0.3
Ferric salts Blue appearance R
Acid and alkalinity Neutral reaction in litmus paper R
Water solube 0.10 <0.10
Acid soluble <4.00 <0.5
Loss on Ignition(1000℃)/% <7.00 <6
Asbestos None Negative
Bacteria (units/gram) <500 <300
Molds <100 <100
Escherichia coli None None
P.Aeruginosa None None
Staphylococcus aureus None None
P.aeruginosa None None
 
 
 
Talc powder Function Add SAMITE brand talcum powder
SiO2% Astigmatism Sun protection enhanced
SiO2% Infrared barrier Resistance to infrared
Whiteness Higher whiteness Better gloss
SiO2% Oil absorption Better Oil control
Low Mosh hardness=1 Soft and delicate Better texture
1. According to Cosmetic regulation all the metal content of talc must be strictly controlled it further required a high purity of talc. The Loss in Ignition is an important data for purity as well as talc powder for cosmetic shall be selected at a very low LOI rate usually 7% and lower LOI ratio (1000℃)is accepted for cosmetic purpose.

2.For cosmetic SiO2 of talc powder shall be higher for  strengthen sunscreen effect and Infrared resistance. SiO2 is the major ingredient in talc it has an astigmatism effect UV reflectivity around 70% to 80%. As addictive for  cosmetic products the better the SiO2 ingredient the better effect.
 
3. Asbestos is recognized as carcinogens asbestos determination shall be detected by both XRD and PLM. An important point is the measurement standard for asbestos are different between China and EU regulations the method adopted in China is GB/T 23263-2009 whereas EU standard is following NIOSH 9000:2015 & ISO 22262-1:2012 the different standard usually cause a different result in conditions of same MDL (Minimum Detection Limit = 0.1%) in some cases asbestos will be found under EU but won’t be found under China standard.

4. Asbestos carcinogens are mainly composed of 6 parts. Take the SGS test as an example.

Test CAS No Unit MDL
(Minimum Detection Limits)
001
Actinolitum 77536-66-4 %(w/w) 0.1 Negative
Asbestos 12172-73-5 %(w/w) 0.1 Negative
Anthophyllite 77536-67-5 %(w/w) 0.1 Negative
Chrysotile 12001-29-5
132207-32-0
%(w/w) 0.1 Negative
Crocidolite in Ironstone 12001-28-4 %(w/w) 0.1 Negative
Amphibole var. Tremolite 77536-68-6 %(w/w) 0.1 Negative

When you are making a purchase from supplier it’s essential to make sure all results above are ‘Negative’. If 5 of above shows Negative whereas just 1 result shows Positive through it means there is Asbestos Ingredient contained.

Other Product

China (Mainland)

+8618805331919

Hong Kong:+85231733712

Brazilian:+5511989954731

WeChat